Home > Metal Cutting > Broaching Go Back
REQUEST PRICE

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • TRIPET
  • Model:
  • 018818 - TRIPET MUS 100
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:

DESCRIPTION

Max. internal grinding diameter: 20 mm.
Centre height: 60 mm.
Distance between centres: 150 mm.
number (steps): 3.
from: 6000 t/min.
up to: 9000 t/min.
Spindle hole: 12 mm.
Taper in spindle:: 12 W.
Rotatable grinding spindle head (b-axis): +45 / -45 °.
Voltage 50 Hz 3x: 380 Volt.
Machine's weight about: 250 kg.
Length: 900 mm.
Width: 750 mm.
Height: 1300 mm.
3-jaw chuck diameter: mm.
Set of collets: W 12.
+ request more information

SEND ENQUIRY

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

You may also be interested in these Machines

    •
      Manufacturer:
      Voumard
      Model:
      022606 - VOUMARD 5 S
      Description:
      {"Min. internal grinding diameter": "5 mm", "Max. internal grinding diameter": "200 mm", "Grinding depth": "250 mm", "Centre height": "180 mm", "Distance between centres": "400 mm", "Max.workpiece length + steady": "550 mm", "Taper in spindle:": "25 ...

      More Info

    • Manufacturer:
      HUAWIN
      Model:
      021338 - HUAWIN EG 1260
      Description:
      {"Max. Spline major diameter": "20 mm", "Max. spline major diameter": "120 mm", "Spline width min.": "4 mm", "Spline width max.": "20 mm", "Number of spline": "1 - 99", "Travels:": "", "X axis": "70 mm", "Y axis": "150 mm", "Z axis": "600 mm", "U axi...

      More Info

    • Manufacturer:
      Voumard
      Model:
      022229 - VOUMARD 203 L6
      Description:
      {"Min. internal grinding diameter": "5 mm", "Max. internal grinding diameter": "120 mm", "Grinding depth": "160 mm", "Centre height": "130 mm", "Workpiece spindle speeds:": "", "number (steps)": "6", "from": "m/min", "up to": "20 m/min", "Max. angle"...

      More Info

    • Manufacturer:
      Model:
      Conical (Morse Taper) Reduction Bush
      Description:
      These reduction bushes allow for the fitting of boring bars and drills with a tapered shaft. All sizes are manufactured in a range of capacities. The sleeves are hardened and ground for a good fit for both the holder and the shaft.

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User