SERRMAC
09216
Drilling capacity on steel R50 mm ø 16
Spindle taper CM2
Spindle stroke mm 90
Spindle diameter mm 52
Column diameter mm 80
Distance between column and spindle center mm 210
Transmission Pulley
Spindle speed rpm 450 - 3.000
Motor power kW 0.55 / 220-380 V (1 speed) three-phase
USED MACHINE
The Kitagawa HW Series are four jaw chucks but unlike conventional four jaw chucks. It works off a 2+2 system clamping two jaws independently guarantees gripping with all four jaws unlike standard chucks. HW series chucks are supplied with blank draw...
World leading performance guaranteed | Long life due to high wear resistance | Continuously carbide coated | High quality surface finish | Higher cutting rates | Extremely durable band edge, suitable for wet and dry cutting
ANNO: 1997
REVISIONATO ANNO 2025
Matricola: F53/00187
Sviluppo lama: 3010 x 27 x 0,9 mm
Capacitò di taglio:
Tondo 260 mm
Quadro 220 mm
Rettangolare 315 x 220mm
Altezza piano Lavoro: 835 mm
Motore rotazione lama:
Velocità 18 – 100 m/min
Potenza 1,...
