Home > Spares & Accessories > Machine Vices Go Back
REQUEST PRICE

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • Pietro Carnaghi
  • Model:
  • MILLING GANTRY/PORTAL PIETRO CARNAGHI MOD. UNIMILL 35 CA
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:
  • N/A

DESCRIPTION

PIETRO CARNAGHI 09396 CNC SIEMENS TECHNICAL DETAILS: Distance between frames mm 3500 Maximum height between table top and spindle nose mm 1850 Working table dimensions mm 3000x16000 Working table capacity kN/m2 50 PORTAL: Portal stroke (X axis) mm 16000 Portal feed speed (X axis) mm/min 0.5-10000 Portal rapid speed (X axis) mm/min 20000 MILLING HEAD: Head section mm 480x480 Cross travel of the carriage on the crossrail - Y axis mm 4000 Vertical travel of the head - Z axis mm 1600 Spindle rotation speed in 2 ranges -1 range rpm 6-185-750 -2 range rpm 25-750-3000 Spindle motor power (S1) kW 37 Max spindle torque at 185 rpm (1st range) Nm 1900 Y and Z axis feed speed: -1 mm/min infinitely variable range 0.5-10000 Z axis rapid speed mm/min 20000 Y-axis rapid speed mm/min 40000 COMPLETE WITH: -Automatic tool clamping -Automatic clamping of accessories -3 positions tool holder disk magazine -120 positions tool holder chain magazine -TV-35 VERTICAL MILLING AND DRILLING HEAD: Type DD210 Distance between spindle and head plate mm 175 Spindle taper DIN 2079-50-AT4-CC Spindle nose DIN 2979-B50 DIN 69871-B50 shank DIN 69872-B28 tie rod Automatic head clamping on machine Head clamping force on machine daN 10000 Automatic tool clamping Tool clamping force in the head daN 1900 Spindle speed 8-3000 rpm Max power at 175 rpm kW 35 Max torque at 175 rpm Nm 1900 Input/output transmission ratio 1:1 Front flange coolant through spindle Spindle air blowing system Max bearing temperature 60 degrees -TS-35 HORIZONTAL MILLING AND DRILLING HEAD: Type DD230 Distance between spindle and head plate mm 200 Spindle taper ISO 50 Spindle nose according to DIN 2079-50 AT4 CC Automatic tool clamping DIN 6987-B50 shank DIN 69872-B28 tie rod Spindle speed 6-3000 rpm Automatic head clamping on machine Max power at 175 rpm kW 35 Max torque at 175 rpm Nm 1900 Input/output transmission ratio 1:1 C2 axis positioning 144x2.5° C2 axis rotation speed rpm 3 Front flange coolant through the spindle Spindle air blowing system Max bearing temperature °C 60 -TVL S 400 VERTICAL MILLING AND DRILLING HEAD: Type DD280SS Distance between spindle and head plate mm 175 Spindle taper DIN 2079-50-AT4-CC Spindle nose DIN 2979-B50 DIN 69871-B50 shank DIN 69872-B28 tie rod Automatic head clamping on machine Head clamping force on machine daN 10000 Automatic tool clamping Tool clamping force in the head daN 1900 Spindle speed 8-3000 rpm Max power at 175 rpm kW 35 Max torque at 175 rpm Nm 1900 Input/output transmission ratio 1:1 Front flange coolant through spindle Spindle air blowing system Max bearing temperature °C 60 USED MACHINE
+ request more information

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

You may also be interested in these Machines

    •
      Manufacturer:
      MACH
      Model:
      SANDING MACHINE COSTA M70 CCS 1150
      Description:
      COSTA 07919 Working width mm 1350 Min/max working thickness 0,8-160 mm Min/max work plane height mm 740-900 Abrasive belt motor power HP 16-20 Brush motor power HP 15 Feed motor power HP 2-3-4 Rubber rollers diameter mm 250 Brush diameter mm 250 Feed...

      More Info

    • Manufacturer:
      Model:
      DEEP HOLE DRILLING IMSA MOD. MF 1100BBLL 6P
      Description:
      IMSA 09970 Maximum drilling depth in single cycle - V axis: 1.000 mm Column, longitudinal movement - X axis: 1.250 mm Drilling slide, vertical movement - Y axis: 1.000 mm Drilling slide, piece support stroke - W axis: 500 mm Maximum axis feed rate: 1...

      More Info

    • Manufacturer:
      Model:
      LATHE CNC NAKAMURA TOME MOD. TMC 35
      Description:
      NAKAMURA TOME New04395 CNC FANUC 16 T Swing over guideways mm 500 Max swing over: -upper turret mm 330 -lower turret mm 165 Max turning lenght: -upper turret mm 832 -lower turret mm 782 Distance between spindle nose and turret: -upper turret min/max ...

      More Info

    • Manufacturer:
      MACH
      Model:
      TIG WELDING MACHINE STEL TIG uP 161h
      Description:
      STEL 08397 ZONE OF CURRENT RANGE 5 - 160 A POWER SUPPLY 220V - 50Hz MAX CURRENT FLOW 160 A USED MACHINE

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User