Home > Spares & Accessories > Machine Vices Go Back
REQUEST PRICE

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • TEST
  • Model:
  • ROUNDNESS TESTING FAG MOD. FMS 4210
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:

DESCRIPTION

FAG New05644 ROTATION AXIS "C AXIS": -Diameter of rotary table 200 mm -Max load capacity 500 N -Max control diameter 300 mm, se il tastatore è posizionato al di sopra del pezzo -Max passage diameter 420 mm -Air bearing -Roundness deviation (sensing direction axisl, measured acc. to ISO 1101) 0.08 ųm at the centre + 0.0008 ųm per mm measuring height -Roundness deviation (sensing direction axial measured acc. to ISO 1101) 0.08 ųm at the centre + 0.0008 ųm per mm radius -Drive: position controlled direct-current motor -Resolution angle measuring system 0.045° -Measuring speed 1.5/3/6/12 min¯¹, variable -Centering range +/- 2.5 mm -Levelling range +/- 30' -Tilting point 30 mm above table surface VERTICAL AXIS "AXIS Z": -Measuring distance 350 mm -Straightness deviation (acc. to ISO 1101) 0.25 ųm/100 mm - 0.8 ųm/350 mm -Air bearing -Position controlled direct-current motor -Resolution distance measuring system 1 ųm -Measuring speed 15,60,300 mm/min, variable, optimal -Moving speed 18 mm/s continuously adjustable by hand lever -Rectangularity relative to C axis: 0.5 ųm/350 mm in sensing direction 2.5 ųm/350 mm at an angle of 90° off the sensing direction HORIZONTAL AXIS "R AXIS": -Measuring distance 150 mm -Straightness deviation (measured acc. to ISO 1101) 1.0 ųm/150 mm -Slide bearing -position controlled direct-current motor -Distance measuring system 1 ųm resolution -Measuring speed variable -Moving speed 25 mm/s continuously adjustable by hand lever -Rectangularity relative to C axis'' SENSING SYSTEM ST200: -Inductive sensing system -Sensing direction bidirectional (no manual switching required) -Measuring range +/- 500 ųm for the 74 mm sensing stylus -Measuring force applied for the 74 mm sensing stylus -Deviation in linearity 1% of the measuring range maximum COMPUTING SYSTEM: -Evaluation computer: freely programmable computer system with colour graphics -Screen 14'' colour -Hard disk 20 MByte -Floppy disck drive 3,5'' -Output unit: dot-matrix printer (laser printer optional) DIMENSIONS: -Height 1720 mm -Width 1760 mm -Front-to-back size 815 mm -Weight 380 kg USED MATERIAL
+ request more information

SEND ENQUIRY

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

You may also be interested in these Machines

    •
      Manufacturer:
      Model:
      DEVIDING HEAD
      Description:
      08132 Height of center mm 260 Diameter mm 400 EQUIPPED WITH: -Sel centering chuck diam 310 double guide -Tailstock USED MACHINE

      More Info

    • Manufacturer:
      Bergonzi
      Model:
      DRILLING BERGONZI MOD. TR40
      Description:
      BERGONZI 08999 Max drilling in steel mm 40 Max drilling in cast iron mm 50 Arm staddle mm 1000 Arm travel mm 550 Head travel mm 750 Potenza motore mandrino HP 3,5 Spindle motor power rpm 40-1400 Spindle diameter mm 75 Morsetaper No 4 Spindle stroke m...

      More Info

    • Manufacturer:
      Model:
      LATHE GRAZIOLI DANIA 180x1500
      Description:
      GRAZIOLI 09317 Center height 180 mm Distance between centers mm 1500 Bed width 300 mm Max turning diameter on the bed mm 1360 Max turning diameter on the carriage mm 214 Gap width mm 240 Max admissible diameter mm 550 Spindle nose CAM LOCK 6 '' Spin...

      More Info

    • Manufacturer:
      Doosan
      Model:
      MULTITASKING LATHE DOOSAN
      Description:
      DOOSAN 10091 MOD. PUMA MX 2600 ST Numerical control Fanuc 31i-A Swing over bed mm 1,000 Max. turning diameter mm 760 Max. turning length mm 1,540 Bar capacity mm 76 Y-axis mm 230 (±115) Spindle (Sub-spindle) ASA A2-8 Rotational speed rpm 4,000 Spind...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User