This C-Frame Press is made in Europe. Suitable for cutting, punching and stamping or other metal working jobs. You can regulate the piston stroke with an electronic NC-controller. With this control-system it is possible to set the position of the piston stroke with an accuracy of 0.1 mm. When you need to hold the press in its lowest position under pressure, you easily adjust this holding time from 0 to 2 seconds. Our C-Frame Press (50 ton) has two work modes: manual and semi-automatic. Its table is equipped with T-grooves and a central hole (ø 100 mm): waste from punching operations can fall freely through this hole into the collection tray. Adjusting the speed and pressing force can be done by means of the hydraulic adjustment valves. Furthermore, the press is also equipped with a manometer. We have many Profi Press C-frame presses in our product program. Feel free to contact us for more information or have a closer look at all the different models at our website.
Fanuc 0i-MF Plus Control Spindle Speed 10,000 RPM Spindle oil cooler Air through spindle Oil mist cutting High pressure coolant Screw type swarf conveyor and horn 2GB CF Card AICC-2 (200 blocks)
Linear slide cutting action-perfection for square & rectangle | High volume production saw | Straight cut of tubes and bar of Ferrous & non-Ferrous material | COT version for high speed brass/ECOBRASS cutting | CN feeding gripper powered by a servo m...
