Home > Spares & Accessories > Centre Lathes Accessories Go Back
REQUEST PRICE

Segments for Master Plates

MACHINE INFORMATION AND SPECIFICATION

    Manufacturer:

  • N/A

    Model:

  • Segments for Master Plates

    Condition:

  • 1

    YOM:

  • NA

    Control:

  • NA

    Price:

  • POA

    Country:

DESCRIPTION
Abbott‘s master plate and segment system is a great choice for turning larger diameter work pieces. The system consists of an aluminum master plate, similar to a thin Pie Jaw®, which is pre-drilled and keyed to accommodate Abbott’s standard, off-the-shelf segment rings. Plates are available in various diameters from 15 to 60 inches and can be mounted on 8-60 inch diameter chucks, effectively increasing the holding capability of smaller chucks. The master plate can be custom machined to fit any model chuck, making it a permanent universal fixture on any machine.When using this system, the transition from one job to the next simply requires bolting on a new size or configuration of segments before continuing with the next production run. For repeat jobs, machine operators can designate job specific tooling, allowing them to setup in minutes by using pre-machined segments from a previous run. Segments are available in specific ID/OD ranges, allowing machining time to be spent on making production parts instead of boring out excess jaw material. The master plate and segment system maximizes flexibility between machines because segments can be used to run jobs on any machine that has been fitted with a master plate, regardless of machine or chuck type. In addition to reduced setup and tool preparation time the system enables material and shipping cost savings as well.
+ request more information

SEND ENQUIRY

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

You may also be interested in these Machines

    •
      Manufacturer:
      Horizon
      Model:
      BED TYPE HORIZONTAL MILLING MACHINE H-1000
      Description:
      Table Data: Capacity | H-1000 Area (Width x Length) | 360x1500mm Longitudinal travel | 1000mm Spindle center to table (Horizontal) arbor arm is used | 230-660mm Cross travel | 540mm Traverse rates (X,Y) | Variable Longitudinal & cross feed speed | 16...

      More Info

    • Manufacturer:
      MACH
      Model:
      System 5 0520 Machineable Faceplates
      Description:
      Faceplates form the base for a fixture to mount directly to the QwikLOK. They are ideal for complex workpieces that cannot be mounted in soft jaws and also allow smaller workpieces to be clamped in larger quantities. Combine a faceplate with simple w...

      More Info

    • Model:
      ZMM C13 (11.537C)
      Description:
      Centre distance (mm): 6000Max swing over bed (mm): 800Max swing over cross slide (mm): 540Max swing in gap (mm): 1050Spindle bore (mm): 136R.P.M.: 6.3 - 850 (24x)kW: 18Volts: 380VCycles: 50

      More Info

    • Model:
      NN - 2.000x2.000 mm (TA109)
      Description:
      {"Brand": "NN", "Machine no": "TA109", "Type": "2.000x2.000 mm", "Capacity TEST": "2.000 x 2.000 x 650mm", "Table length": "2.000 mm", "Table width": "2.000 mm", "Table thickness": "70 mm", "Machine dimensions (L\u00d7W\u00d7H)": "2.000 x 2.000 x 650...

      More Info

    • Manufacturer:
      COLLY
      Model:
      H-frame presses Colly 150 ton mobile straightening press
      Description:

      More Info

    • Switzerland
      Model:
      COMBI SHELL MILL HOLD EROGLU DIN 69871 ISO40 AD Ø 32 L60
      Description:

      More Info

    • United Kingdom
      Manufacturer:
      Asquith
      Model:
      Asquith OD1 mk2
      Description:
      SpecificationSpindle Speeds 9.5 to 1560 (18)Spindle taper No 5 morseSpindle travel 410mmFeeds 0.066 to 0.963Max spindle height spindle to base 70”Column diaGraduations metricPower LockingEquipmentSafety brakeBox tableCoolantElectrics 440 V 3 phase...

      More Info

    • Manufacturer:
      Stanko
      Model:
      022299 - STANKO 2N 150
      Description:
      {"Table length": "570 mm", "Table width": "500 mm", "Number of T-channels": "3", "Distance of the T-slots": "110 mm", "T-channel width": "22 mm", "Taper in spindle: MT": "5", "Depth of throat": "300 mm", "Drill depth (spindle stroke)": "300 mm", "Spi...

      More Info

    • Model:
      LEAVE 630×630
      Description:
      {"Year": "", "Length": "630 mm", "Width": "630 mm", "Height": "700 mm", "Weight": "349 kg"}

      More Info

    • Model:
      NN - 760 x 500 (M1023)
      Description:
      {"Brand": "NN", "Machine no": "M1023", "Type": "760 x 500", "corner plate": "", "corner bracket": "", "Length": "760 mm", "Height": "500 mm", "T-slots horizontal": "2", "T-slots vertical": "3", "Machine dimensions (L\u00d7W\u00d7H)": "760 x 350 x 500...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User