Home > Associated Products > Washing and Degreasing Go Back
REQUEST PRICE

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • Model:
  • 022497 - ROLLOMATIC FRP 200
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:

DESCRIPTION

Table length: 135 mm.
Table width: 130 mm.
Number of T-channels: 3.
T-channel width: 10 mm.
Distance of the T-slots: 40 mm.
Grinding length: 45 mm.
grinding diameter: 20 - 200 mm.
Grinding-wheel diameter: 150 mm.
Width of the grinding wheel: 10 mm.
Drilling cap. of grind.wheel: 20 mm.
Spindle inclination (A-axis): 0 - 180 °.
Voltage 50 Hz 3x: 400 Volt.
motor speeds: 2700 t/min.
Grinding spindle motor: 0.37 kW.
Machine's weight about: 200 kg.
Length: 1000 mm.
Width: 700 mm.
Height: 1600 mm.
+ request more information

SEND ENQUIRY

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

You may also be interested in these Machines

    •
      Manufacturer:
      VARI
      Model:
      Tongue and Groove Vario Jaws
      Description:
      Cylindrical and cubic workpieces can be clamped with the Vario jaw. The clamping inserts can be placed at different points of the jaw, thus can be covered with a jaw set a large range of parts. By exchanging the clamping inserts both raw parts and wo...

      More Info

    • Manufacturer:
      Model:
      Tongue and Groove Prism Jaws
      Description:
      For clamping workpieces that must not be damaged. The clamping surface is grooved and not ribbed. This results in reducing the potential for marking components. The stepped jaw is hardened approx. 0.2 mm deep. The accuracy of the surface with respect...

      More Info

    • Manufacturer:
      STUDER
      Model:
      016463 - STUDER DSA
      Description:
      {"Capacity of the machine:": "", "Dressing diameter": "75 - 250 mm", "Flank angle": "0 - 180 \u00b0", "Rotation speed": "2800 t/min", "Dressing wheel:": "", "Diameter": "100 mm", "Width": "550 mm", "Bore": "20 mm", "Voltage 50 Hz 3x": "380 V...

      More Info

    • Manufacturer:
      Model:
      Tongue and Groove Step Jaws w/ Inserts
      Description:
      For clamping different materials for the optionally three different clamping inserts are available. The use of teeth results in a high surface pressure whereby maximum holding forces are achieved. In the case of wear of the Mastergrip clamping claws ...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User