Centre height: 102 mm. Distance between centres: 375 mm. Swing over cross-slide: 120 mm. Swing over bed: 200 mm. Inner taper type: 20 W. number (steps): 12. from: 45 t/min. up to: 2800 t/min. Voltage 50 Hz 3x: 380 Volt. Spindle motor: 0.5 CV. Machine's weight about: 300 kg. Length: 2000 mm. Width: 1000 mm. Height: 900 mm.
These reduction bushes allow for the fitting of boring bars and drills with a straight shaft. All sizes are manufactured in a range of capacities. The sleeves are hardened and ground for a good fit for both the holder and the shaft.
The Kitagawa HW Series with Adaptor are four jaw chucks but unlike conventional four jaw chucks. It works off a 2+2 system clamping two jaws independently guarantees gripping with all four jaws unlike standard chucks. HW series chucks are supplied wi...
Table Data:
Capacity | 2500UM
Table area | 1500x350mm
Number of “T” shaped slots | 5-16H7
Distance between “T” shaped slots | 60mm
Rotary movement of table in both direction | 45º
Automatic longitudinal | 1150mm
Automatic cross | 400mm
Aut...
MOSSINI
10141
OLEODINAMIC PRESS MOSSINI mod. PO/2M/P 250
Nominal force Ton 250
Slide stroke mm 1.000
Work table dimensions mm 2.500 x 2.000
Max workpiece dimensions mm 2.400 x 1.900
Max workpiece weight kg 5.000
Distance between columns mm 2.500
Dayl...
