Home > Metal Cutting > Lathes (CNC and Manual) Go Back
REQUEST PRICE

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • SCHAUBLIN
  • Model:
  • 021975 - SCHAUBLIN 180 CCN R-T
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:

DESCRIPTION

Centre height: 275 mm.
Distance between centres: 600 mm.
Swing over cross-slide: 150 mm.
Swing over bed: 600 mm.
Maximum turning length: 630 mm.
Bar passage: 60 mm.
Longitudinal travel (Z-axis): 672 mm.
Transversal strocke (X axis): 230 mm.
Resolution: mm.
Number of positions turret 1: 12.
Fixed tools turret 1: 12.
Inner cone diameter: 20 x 20 mm.
Inner cone DIN: VDI 30.
Camlock: A2-6.
C axis (spindle,resolution): 0.001 °.
from: 30 t/min.
up to: 4000 t/min.
Internal spindle diameter: 60 mm.
Feeds: 0 - 5000 mm/min.
Rapid traverse X: 8 m/min.
Rapid traverse Y: 10 m/min.
Spindle motor: 15 / 18.5 kW.
Air connect: 5 - 7 bar.
Flow rate cooling water pump: 10 l/min.
Voltage 50 Hz 3x: 400 Volt.
Noise level: 75 dB (A).
Total power required: 24 kVA.
Machine's weight about: 2460 kg.
Length: 2301 mm.
Width: 1460 mm.
Height: 1676 mm.
3-jaw chuck diameter: 200 mm.
4-jaw chuck diameter: 200 mm.
Set of collets: B45.
+ request more information

SEND ENQUIRY

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

You may also be interested in these Machines

    •
      Manufacturer:
      Model:
      NN (D839)
      Description:
      {"Brand": "NN", "Machine no": "D839", "Glasses": "", "Capacity": "20 T", "Center height": "700 mm", "Diameter": "1.700 mm \u00f8"}

      More Info

    • Manufacturer:
      JUNG
      Model:
      Jungenthal - DK 1200 (D561)
      Description:
      {"Brand": "Jungenthal", "Machine no": "D561", "Type": "DK 1200", "4-jaw chuck": "", "Chuck diameter": "1.100 mm \u00f8", "Turning height": "1.200 mm", "With side support": "", "Table diameter": "1.100 mm \u00f8"}

      More Info

    • Manufacturer:
      SCHAUBLIN
      Model:
      022932 - SCHAUBLIN 180 CCN R-T
      Description:
      {"Centre height": "275 mm", "Distance between centres": "600 mm", "Swing over cross-slide": "150 mm", "Swing over bed": "600 mm", "Maximum turning length": "630 mm", "Bar passage": "60 mm", "Carriage:": "", "Longitudinal travel (Z-axis)": "672 mm", "...

      More Info

    • Manufacturer:
      Model:
      Dörries VCE 160 (12.777DH)
      Description:
      Maximum Swing (mm): 2100Maximum Height (mm): 17004-Jaw Face Plate (mm): 1600Maximum Load (kg): 20000

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User