Home > Associated Products > Washing and Degreasing Go Back
REQUEST PRICE

022497 - ROLLOMATIC FRP 200

MACHINE INFORMATION AND SPECIFICATION

    Manufacturer:

    Model:

  • 022497 - ROLLOMATIC FRP 200

    Condition:

  • 1

    YOM:

  • NA

    Control:

  • NA

    Price:

  • POA

    Country:

DESCRIPTION
Table length: 135 mm.
Table width: 130 mm.
Number of T-channels: 3.
T-channel width: 10 mm.
Distance of the T-slots: 40 mm.
Grinding length: 45 mm.
grinding diameter: 20 - 200 mm.
Grinding-wheel diameter: 150 mm.
Width of the grinding wheel: 10 mm.
Drilling cap. of grind.wheel: 20 mm.
Spindle inclination (A-axis): 0 - 180 °.
Voltage 50 Hz 3x: 400 Volt.
motor speeds: 2700 t/min.
Grinding spindle motor: 0.37 kW.
Machine's weight about: 200 kg.
Length: 1000 mm.
Width: 700 mm.
Height: 1600 mm.
+ request more information

SEND ENQUIRY

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

You may also be interested in these Machines

    •
      Manufacturer:
      Model:
      PTC HYDRODYNAMIC UNIT
      Description:
      PTC 09762 MOD. KAMAT K10016A HIGH PRESSURE ENGINE IVECO N67MSTD20: Max 2300 rpm - kW 129 calibrated at 2000 rpm - kW 110 PUMP KAMAT K 10016 A: Pistons diam. mm 16 Flow rate lt/min 27 Pressure bar 2500 Input power kW 130 UNIT DIMENSIONS: Length mm 330...

      More Info

    • Manufacturer:
      Model:
      021381 - GREINER U-3 ECO
      Description:
      {"Total power required": "0.3 kW", "Overall dimensions machine:": "", "Length": "420 mm", "Width": "390 mm", "Height": "700 mm"}

      More Info

    • Manufacturer:
      VARI
      Model:
      Tongue and Groove Vario Jaws
      Description:
      Cylindrical and cubic workpieces can be clamped with the Vario jaw. The clamping inserts can be placed at different points of the jaw, thus can be covered with a jaw set a large range of parts. By exchanging the clamping inserts both raw parts and wo...

      More Info

    • Manufacturer:
      Model:
      Tongue and Groove Prism Jaws
      Description:
      For clamping workpieces that must not be damaged. The clamping surface is grooved and not ribbed. This results in reducing the potential for marking components. The stepped jaw is hardened approx. 0.2 mm deep. The accuracy of the surface with respect...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User