022524 - TORNOS Micro 8

MACHINE INFORMATION AND SPECIFICATION

    Manufacturer:

  • TORNOS

    Model:

  • 022524 - TORNOS Micro 8

    Condition:

  • 1

    YOM:

  • NA

    Control:

  • NA

    Price:

  • POA

    Country:

DESCRIPTION
Number of axis total: 7.
Workpiece length max.: 20 mm.
Max. bar diameter: 10 mm.
Inner taper type: F13.
from: t/min.
up to: 12000 t/min.
C axis (spindle,resolution): °.
Rapid traverse X: 20 m/min.
Rapid traverse Y: 40 m/min.
Rapid traverse Z: 20 m/min.
Voltage 50 Hz 3x: 400 Volt.
Spindle motor: 2.2 / 3.7 kW.
Power of back spindle: 2.2 / 3.7 kW.
Total power required: 8 kVA.
Machine's weight about: 1600 kg.
Length: 1670 mm.
Width: 870 mm.
Height: 1650 mm.
Manufacturer: LNS.
Type: TRYTEX 08.
year of manufacture: 2009.
Oil mist extractor: Donaldson.
High frequency spindle: 2X.
+ request more information

SEND ENQUIRY

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

You may also be interested in these Machines

    • Switzerland
      Manufacturer:
      Description:
      OPEN HEADSTOCK "SCHAUBLIN" FOR W-20 COLLETS New - Reference: 800239 ...

      More Info

    • France
      Manufacturer:
      Description:

      More Info

    • Description:
      {"Brand": "Isitan", "Machine no": "BG163X", "Type": "HP-22", "Year of make": "2019", "Capacity": "22 T", "Tool height": "120 mm", "V": "73 mm", "Stroke": "200 mm", "Table length": "1.100 mm", "Table width": "630 mm", "Machine size (lxwxh)": "1.100 x ...

      More Info

    • Belgium
      Manufacturer:
      Description:
      Lubrication system main spindle Automatic lubrication system Coolant equipment Rear guard over the entire length of the machine Square tool post Fixed centre and reduction sleeve Leveling feeds Protection of the shaft Protection of the chuck with mic...

      More Info

    • Model:
      Description:
      New05648 USED MATERIAL

      More Info

    • Description:
      {"Brand": "JWelding", "Machine no": "L142", "Type": "KTS-3", "Capacity": "3.000 kg", "Roll diameter": "250 mm \u00f8", "Max. workpiece diameter": "2.200 mm \u00f8", "min. Workpiece diameter": "150 mm \u00f8", "Variable speed": "", "Engine power": "2 ...

      More Info

    • Description:
      10085 height mm 1200x 700 Base dimensions 1000x600 USED EQUIPMENT

      More Info

    • Description:
      {"Brand": "NN", "Machine no": "D1032", "Type": "160mm \u00f8", "Glasses": "", "Glasses for lathe": "", "foot width": "200 mm", "Center height": "230 mm", "Maximum diameter": "160 mm \u00f8", "Machine size (lxwxh)": "400 x 80 x 500 mm"}

      More Info

    • More Info

    • Description:
      Max pulling capacity: 37.5 TonsCutting speeds: 5 - 16 feet per minuteMax. stroke length: 72 inchesReturn Speeds: 100 feet per minuteCNC Control (Make & model): N/ATotal Power HP/KW: 30 HP

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User