HFE 1703S is a 187 ton, down-acting hydraulic press brake with a bedlength of 10 feet. There are 148" between the frames, with an open height of17.7". The maximum travel distance of the ram is 7.0", and the maximum bendlength that can be formed is 171". The ram repeatability is 0.0004", whilethe backgauge can travel 27.5".The HFE 1703S has an Operateur CNC control, which is used to control theram and backgauge, as well as other appropriate functions. The control has theability to program the machine in either GRAPHICS Mode, ANGLE Mode, DEPTH Modeor to reverse the ram based on tonnage. The HFE 1703S also features a 16"throat, sectionalized punch holders with fast release clamp, a larger brakefor staging a variety of complex parts, a foot pedal, and a hand wheel.System SpecificationsPress BrakeCapacity: 187 U.S. tonsBed Length: 122 inchesMaximum Stroke Length: 7.8 inchesOpen Height: 18.5 inchesThroat Depth: 16.5 inchesDistance Between Side Frames: 106 inchesRam Repeatability: +/- 0.0004 inchesAdvance Speed: 472 IPMPress Speed: 2 - 47 IPMReturn Speed: 2.4 - 472 IPMOverall Weight: 25,520 lbs.Overall Dimensions: 14' L x 8' W x 9'6" HMachine Power: 27.5 KWFoundation: 6 inch concrete slabBackgaugeModelAmada Type BRepeatability: X Axis +/- 0.0004 inchesMovement RangeX Axis 27.5/37.5 inchesR Axis 9.84 inchesZ Axis 137 inchesFeed SpeedX Axis 19.5 inches per secondR Axis 6.2 inches per secondZ Axis 39.3 inches per second .
MORANDO
10124
Center height mm 1.300
Swing over bed mm 2.615
Swing over carriage mm 2.240
Faceplate diameter mm 1.700
Spindle bore diameter mm 100
Bed width mm 1.500
Carriage base length mm 1.200
Swiveling slide travel for taper turning mm 400
Admitt...
