The Kitagawa BR series is a large bore three jaw chuck also available with an Adaptor Plate . When coupled with T-nuts Plus a T.I.R of 0.01mm or less can be maintained to reduce setup times. The Chucks are supplied with a blank drawnut. Set of Soft Jaws and a set of standard T-nuts as standard.
High Precision, Ultra-large Through-hole High-speed Power Chuck Chucks are manufactured from high grade alloy steel. Three jaw wedge style power chucks deliver up to 20% more speed, Gripping force and bore size when compared to conventional chucks. Easy to upgrade from existing chucks, Fully interchangeable with the Kitagawa B-200 and BB-200 series chucks. The only requirement is a new threaded drawtnut. The BR Series uses the same hydraulic cylinder. if changing size for size, allowing you to implement the best performance at the lowest cost
also available without a adaptor platehttps://www.1mta.com/product/br-series-with-adaptor-plate/BR Series Chuckhttps://kitagawa.global/en/products/power-chucks/open-centre/br-high-accuracy-standard.html
Overhauled MachineHeight of Centres 190mmMax’ Distance Between Centres 1250mmMax’ Swing over Bed 390mmMax’ Swing over Cross Slide 240mmMax’ Swing in Gap 580mmSpindle Bore 54mmSpindle Nose D16 CamlockSpindle Taper in Bush No.4 MorseSpindle Spe...
KSJ-06H Steel serrated soft jaws to suit a 6 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of material allows for machining with a good finish.Jaw Finder
