Gripper jaws can be a great way of getting round part movement in roughing operations, this is by use of teeth in the jaw which bite into the material. This biting can also be a great way to get round problems using black bar or other rough material. The depth of the backstop on the jaw can be adjusted by using screws, these screws are ground and hardened to give you a good backstop for the component. 3087 and 3083 are for gripping bar and do not have the backstop inbuilt into the jaw.
LOIRE SAFE
10139
HYDRAULIC PRESS LOIRE SAFE mod. EDIMC 2000
Adjustable maximum slide force Ton 200 to 2.000
No. 04 Cylinders
Net slide return force Ton 130
Maximum workpiece dimensions mm 5.000 x 2.800 x 1.700
Max. workpiece weight kg 60.000
Upper pa...
Super competitive purchase cost | Patented Design | Zero manufacturer maintenance costs | Lowest running costs | 5 stage filtration | 4 Washable filters in warm water only | Hepa H13 filter which can be replaced by user | Unrivalled performance
Code: COL006Height of Centres: 170mmBed Length Between Centre: 650mmSwing over Bed: 350mmSwing in Gap: 535mmSwing over Cross Slide: 196mmSpindle Bore: 42mmSpindle Nose mounting: D1-4 CamlockMorse Taper in Nose Bush: No. 3 MTNumber of speed ranges: 3 ...
EHA
09634
Spindle diameter min 400 mm
Spindle diameter max 800 mm
Extraction length 8,000 mmm
Maximum extraction force for 60 mm diameter spindle: 210 kN (90 bar)
Maximum extraction force for 100 mm diameter spindle: 400 kN (160 bar)
Pipe support max...