WALDRICH COBURG
09391
MULTITECH 3500 FT
PORTAL WITH MOVABLE CROSSRAIL
-Numeric Control Siemens Sinumerik 840 D
-Tables (No.2):
Width mm 3000
Lenght front table mm 4500
Lenght back table mm 4500
Lenght with coupled tables mm 10000
T slots in longitudinal direction mm 28/H8
Distance mm 250
Max load front table Kg 20000
Max load back table Kg 20000
Max load coupled table Kg 30000
-Distance width between columns mm 3500
-Height distance between table and spindle nose of vertical spindle unit. VS 125 C/150 mm 1500
AXIS TRAVEL:
-Table, longitudinal (X-axis):
table 1 mm 5000
table 2 mm 5000
coupled tabel mm 11000
-Milling and drilling unit, horizontal (Y axis) mm 4500
-Spindle slide, vertical (Z axis) mm 1250
-Crossrail (W axis) mm 1000
MILLING/DRILLING UNIT TYPE M4:
Drive power kW 45
Milling and drilling unit revolutions:
-I range rpm 5-1300
-II range rpm 40-6000
Automatic indexing of horizontal spindle units from 1 to 1 degree in the range of 0-360 degrees
AUTOMATIC TOOL CHANGE SYSTEM FOR TOOLS AND MACHINING UNITS
ROBOT:
- Double collet for tool change in vertical and horizontal spindle units
- Double collet for machining unit change in milling and drilling unit
-Tool flange diameter mm 97.5-125
-Max tool weight Kg 50
-Max weight for working unit Kg 750
SHELF TOOLMAGAZINE
Number of shelves 4
Total number of tool positions 192
Total number of positions per machining unit 4
Tool holder according to DIN 69871 ISO 50
Distance between position and position mm 140
Max tool diameter with fully occupied positions mm 135
Max tool diameter:
- standard mm 250
- direct feed with shuttle trolley mm 315
Max tool length:
-standard 375 mm
-in storage in the top row of magazine 600 mm
OVERALL DIMENSIONS:
-Total length of the machine mm 25200
-Total width of the machine mm 11200
-Total height of the machine from the floor mm 5500
COMPLETE WITH:
-N.01 vertical spindle ISO 50 length 300 mm
-N.01 vertical spindle ISO 50 length 450 mm
-N.02 heads 90°
-Piece checking with Renishaw probe
USED MACHINE
PERINI
08203
Tool travel da 0 a 200 mm
Strokes per minute 20-80
Worktable 300 x 600 mm
Automatic tool stop
Tilting head +/- 45 degrees
EQUIPPED WITH:
-Chuck diam. mm 200
-Tank with pump for water collection
USED MACHINE
CASER
07027
Drilling capacity on steel mm 50
Drilling capacity on cast iron mm 70
Arm lenght mm 1250
Spindle diameter mm 60-80
Spindle travel mm 350
Morse taper CM 5
Spindle speed 12 - rpm 30-2000
Spindle motor power HP 5,5
Approx. net weight Kg 3550...
EMMEGI
10109
Maximum bar length mm 7.500
Milling unit:
ISO 25 tool attachment cone
X axis mm 240 (longitudinal)
Y axis mm 350 (transverse)
Z axis mm 350 (vertical)
U axis mm 9.500 (longitudinal Pusher)
A axis mm 360 degrees (slewing ring)
X, Y, Z pos...