Home > Metal Cutting > Machining Centres Go Back
REQUEST PRICE

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • Starrag
  • Model:
  • 019043 - STARRAG ZS 500-130
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:

DESCRIPTION

Number of axis simultaneous: 5.
Number of spindles: 1.
Table load max.: 800 kg.
Longitudinal travel (X-axis): 800 mm.
Transversal travel (y-axis): 750 mm.
Vertical travel (z axis): 620 mm.
Height: 4000 mm.
Diameter: 500 mm.
Table divisions (B): 0,001° °.
A axis: 145° (+35/-110°).
Table speed: 30 t/min.
Pallets:: System Staflex.
numbers: 4.
Length: 8000 mm.
Width: 5000 mm.
Transport weight: 200 kg.
Number of tools: 60.
Tool diameter max.: 120 mm.
Diameter with free adjacent pockets: 200 mm.
Tool lenght: 400 mm.
Max. tool-weight: 15 kg.
Spindle nose:: HSK-A 100.
Spindle speeds:: STEP TEC.
up to: 12000 t/min.
Torque max.: 250 Nm.
Rapid traverse:: 40 m/min.
Air connect: 5 bar.
Voltage 50 Hz 3x: 400 Volt.
Spindle motor: 40 kW.
Total power required: 120 kW.
Machine's weight about: 22000 kg.
+ request more information

SEND ENQUIRY

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

You may also be interested in these Machines

    •
      Manufacturer:
      Bridgeport
      Model:
      Hardinge Bridgeport 5AX - 500
      Description:
      Table size: 280mm diameterCapacity L x W x H: X=700 Y=590 Z=430mm C= 0.001Spindle taper: BT40Spindle speeds: 12000rpmFeed rates: 20m/minRapid traverse rates: 32m/minNo of stations on Auto toolchanger: 40 station tool changerCNC Control system (Make &...

      More Info

    • Manufacturer:
      Colchester
      Model:
      023127 - COLCHESTER MASTER 3250
      Description:
      {"Centre height": "170 mm", "Distance between centres": "1250 mm", "Swing over cross-slide": "196 mm", "Swing over bed": "350 mm", "Swing in gap": "535 mm", "Turning length": "mm", "Spindle hole": "42 mm", "taper in spindle: MT": "3", "Camlock": "D1-...

      More Info

    • Manufacturer:
      Model:
      FIDIA 5 AXIS CENTER KR 214
      Description:
      FIDIA 10182 NUMERICAL CONTROL Fidia C20 X-axis travel 2.700 mm Y-axis travel 1.100 mm Z-axis travel 1.400 mm Max. feed rate on X-Y-Z axes 24 m/min 5-axis head HSK 63 Spindle power (S6-60%) 34 kW Spindle speed 240–24.000 rpm C-axis rotation ±200° ...

      More Info

    • Manufacturer:
      XYZ
      Model:
      XYZ65 LTY-S
      Description:
      Twin Sub SpindleSpindle: 24 Kw (32 hp)Hydraulic Chuck: 200mm/150mmBar Capacity: 66mmMain Spindle: 4000 rpmSub Spindle: 5000 rpm

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User