KEY ELEMENTS:
BOW AND FIELD OF CUT:
ENGINE CONTROL PANEL:
AND BASE MACHINE VICE CLAMPING PIECE:
PARTS ADJUSTABLE SAFETY SYSTEMS:
OPERATION:
Machine operation manual handling (downhill and uphill) of the bow and the movement of the vise clamping piece (opening and closing) must be performed manually by the operator.
Putting the machine live at the main switch located on the control panel and then select the most appropriate cutting speed for the material and the section to be cut.
Then:
TECHNICAL SPECS:
VERSIONS:
On request, you can get voltages and / or frequencies are different from those mentioned above.
OPTIONS:
- Man. Year 1985/2006
- Control Heidenhain iTNC 530
- Spindle diameter: 100 mm
- Travel X axis: 2000 mm
- Travel Y axis: 1500 mm
- Travel Z axis: 1000 mm
- Travel W axis: 500 mm
- Tool magazine: 40 pos.
- Table surface L x W: 1100 x...